Free Data Matrix barcode generator

Use this free Data Matrix barcode generator on a small part, a circuit board, or a tiny tag. It packs more into a square than a QR code of the same size. A phone link is usually a QR code instead. No signup. Print from this computer. Leave a quiet zone around the square or the camera will not read it.

Data Matrix

Use Data Matrix on small industrial parts. Use QR when a phone should open a URL. Data Matrix is denser on a 1×1 or 0.75 inch tag. The first draw may load a small script in the browser.

How to print a Data Matrix

  1. Open app.mylabelmaker.com (no signup), or click Generate above with the part or serial filled in.
  2. Type the value the part spec uses. Data Matrix is a 2D symbol. It can hold a serial, a lot, or a short healthcare code in a small square.
  3. Start from a 1.25 by 0.75 label. Leave a quiet zone around the square. At 203 dpi, keep each module at least 2 dots, and 3 dots if the scanner is fussy.
  4. Scan the sample with the shop-floor reader that is set up for Data Matrix. A customer phone is the wrong test for a part mark.

Data Matrix on small parts

Use Data Matrix when the label is tiny: a circuit board, a vial, a tool, a healthcare unit dose. It packs more into a square than a QR code of the same size. Use QR when a phone should open a URL. This form is one value box. It does not build a GS1 application identifier string for you. If the spec says to encode a particular string, paste that string.

  • Letters and numbers both fit. There is no retail check digit to calculate on this page.
  • The quiet zone is a clear margin around the square, about one module. A border that touches the finder pattern will fail.
  • On a 203 dpi head, a module under 2 dots disappears into the print. Prefer 3 dots, about 0.015 inch, when the label has room.
  • A 1.25 by 0.75 label is 254 by 152 dots at 203 dpi. That is enough for a short serial and a quiet zone. A long record needs a larger label.
  • The first draw may load a small script in the browser. If the square does not appear, generate again after it loads.

Healthcare and parts, not a menu QR

A menu, a WiFi card, and a website belong on the QR pages. Data Matrix belongs where a 2D imager on the line is the reader. Print dark modules on a light ground. Direct part marks on metal are a different process. This tool prints a label. Put the human-readable serial next to the square in the barcode label maker so someone can still type it.

Other tools

Questions

Will a phone scan Data Matrix?

Some cameras do. The usual reader is a shop-floor or healthcare scanner set up for Data Matrix. For a customer link, use a QR code.

How small can the square be?

Keep each module at least 2 dots at 203 dpi, and 3 dots when you can. A 1.25 by 0.75 label is a practical start for a short serial.

Is Data Matrix the same as QR?

No. Both are 2D. Data Matrix is denser on a tiny part. QR is what you want when a phone should open a page.

Do I need a check digit?

Not as a separate digit you type. Error correction is inside the symbol. Type the serial or code the spec gave you.