Zebra label orientation is wrong. See the Zebra label software.

Rotate the design 180°, or the driver. Not both. Then print one test.

Zebra label orientation is wrong

Published: · 3 min read · Problem

When the Zebra label orientation is wrong, it's usually a landscape versus portrait mix-up, so the face prints sideways. Decide which edge comes out first, set the label that way, and only then rotate 180° if the peel is backwards.

How it works

Get the label facing the way the roll feeds

Sideways labels come from a width and height the wrong way round. Rotate once, then print one test.

Rotate once, then print one test

Set the size to your roll, rotate in the design or the driver (not both), and check one label. No signup.

Open the free label maker

1Why

Why the Zebra label orientation is wrong

The text runs along the long edge when you wanted it across the short one. Or the label is the right way round, but upside down when it comes off the printer.

Both come down to the same thing: the label on screen and the label in the printer don't agree on which edge is the top.

It gets confusing when two things rotate. If the design is turned and the Windows driver is also turned, they can cancel out or stack up. Pick one place to rotate.

Good to know: carrier 4×6 postage PDFs have a required orientation. Print those as issued.

2Examples

Labels to try it with

These are real renders from the editor, with made-up details. Click one and it opens with that exact label.

3How to

How to fix Zebra label orientation

When the roll in the printer is 4 by 6, the 4x6 shipping labels page has the size ready to go.

  1. Open https://app.mylabelmaker.com. No signup.
  2. Set the label size to the exact width and length of the roll in the printer.
  3. Rotate the design 180°. If the Windows driver already has a rotate, turn that off instead.
  4. Print one test label. Don't send a whole stack until the tear-off edge is where you want it.

4Good to know

The tear-off edge

If the top of the design is at the tear bar when you wanted the bottom, rotate 180° in the design and leave the driver at its default.

That's all it takes. One rotation, in one place.

Rotate in the design or in the driver. Not both.

5Print

Print the rest

When the test looks right, print the run from the same design. Save a JSON copy so you can open it again later.

The same design works for a list of barcode labels from Excel. If you need bars for a number you already have, use the barcode label maker. If you're starting from ZPL code, preview it in the ZPL viewer first.

Questions about Zebra label orientation

How do I fix Zebra label orientation?

Rotate the design 180 degrees, or the driver, not both. Then print one test from the free label maker.

Why is the top of my label at the tear bar?

The design faces the wrong way for how the label exits. Rotate 180 degrees in the design and leave the driver at its default.

Should I rotate a carrier 4x6 postage label?

No. Carrier 4x6 postage PDFs have a required orientation. Print those as issued.