How to Set Up Your Zebra Printer for Web-Based Printing

Setting up your Zebra printer for web-based printing with mylabelmaker is a straightforward process. This guide will walk you through the installation of Browser Print and the configuration of your printer for optimal performance.

1 Download and Install Browser Print

First, download the Browser Print utility for your operating system:

2 Install Browser Print

After downloading, follow these steps:

1. Run the installer with administrator privileges
2. Accept the license agreement
3. Choose the default installation options
4. Allow the installation to complete
5. Restart your computer if prompted

3 Connect Your Printer

Ensure your Zebra printer is:

• Powered on and connected to your computer
• Loaded with labels
• Set to the correct label size
• Calibrated for your label stock

4 Verify Browser Print Installation

To verify the installation:

1. Open mylabelmaker in your web browser
2. Click the printer icon in the top right
3. Your Zebra printer should appear in the list
4. Select your printer to set it as default

5 Configure Print Settings

For optimal print quality:

• Set the correct label dimensions
• Adjust darkness settings if needed
• Configure print speed for your material
• Test print alignment and adjust if necessary

Next Steps

With your printer configured, you're ready to start creating professional labels with mylabelmaker. Check out our other guides for tips on designing effective labels and making the most of our platform's features.